Description

The Allen-Bradley 1734-VTM module has been designed and manufactured as a voltage terminal module in the Allen-Bradley Point I/O 1734 module series.

Part Number/Catalog: No. 1734-VTM
Module Type: Terminal Module
Isolation Voltage: 250 Volts Continuous
Field Power Supply: 1-28.8 Volts DC or 12/240 Volts AC
Field Power Supply: Current 4 amps/module

1734-VTM is installed on 1734 terminal base modules to offer support to maximize the density of the POINT I/O (8 channels) modules and control every field device wiring to the POINT I/O. The 1734-VTM Voltage Terminal Module can be installed on any of the 1734-TOP, 1734-TOPS, 1734-TB, or 1734-TBS terminal base units, and has 5 key-switch positions.

It has an isolation voltage of 240V AC (continuous), with the basic insulation type that has been tested at 1600V DC for 60 seconds between the field side and system.

The field voltage supply of the 1734-VTM Voltage Terminal Module ranges between 10 and 28.8V DC and 120-240V AC at a field power supply current of 4 amps/module and a field maximum current supply of 2A per point for four modules. It uses terminal base screws determined by the terminal base block for mounting.

The 1734-VTM Voltage Terminal Module is equipped with a signal termination at various points in the circuit ranging from the 0-common at 0 Voltage out to 7-common at 7 voltage out.

The 1734-VTM Voltage Terminal Module is c-UL-us certified for safety and has an open-style enclosure type. Its operational shock rate is 30G, which reaches 50G (non-operational), and a maximum 5G vibration at 10-500HZ. It also has an ambient operating temperature of -20-55°C (-4-131°F), at 5-95% non-condensing relative humidity.