The Allen-Bradley 1734-TB is a POINT I/O Terminal Base. It has 8 Positions and a Clamp Type of Cage-Clamp RTB.
Part Number/Catalog: No. 1734-TB
Module: Type Terminal Base
Clamp Type: Cage-Clamp RTB
This terminal base was designed to be used with POINT I/O modules and devices. The Allen Bradley 1734-TB terminal base utilizes screw-clamp terminations.
To install the removable terminal block (RTB), the first step is to insert the end opposite of the handle into the 1734-TB. Next, one must rotate the terminal block into the wiring base. Do this until the unit locks into place. Then, snap the handle of the RTB into place on the module if an input / output module is installed. Finally, insert the module down into the wiring base then press to secure it. Once that is completed, the module will lock into place.
The Allen Bradley 1734-TB terminal base has a field power bus voltage of 240 volts alternating current (AC). Additionally, it has a field power bus current of ten (10) amperes maximum. This terminal base has physical dimensions that measure 65 millimeters x 12 millimeters x 133.4 millimeters, or 2.560 inches x 0.472 inches x 5.250 inches (height x width x depth). Additionally, this product has an approximate weight of 83.35 grams, or the equivalent of 2.94 ounces. The operating temperature range suitable for this terminal base is -20 to 55 degrees Celsius.
If this product needs to be stored, the temperature range suitable for this product is -40 to 85 degrees Celsius. The relative humidity levels that are appropriate for this unit range from 5% to 95% non-condensing.