Allen Bradley CompactLogix 16 Pt 240VAC D/O Module 1769-OA16


  • In Stock!

  • Manufacturer: Allen Bradley – PLC
  • Pduct Type: PLC/Programmable Logic Controller
  • Part Number: 1769-OA16
  • Series: CompactLogix
  • UPC: 10612598286222
SKU: 1769-OA16 Category:


The 1769-OA16 module is an Allen-Bradley/Rockwell Automation solid-state output module with a compact design. The voltage category of this unit is 120 to 240 volts AC. This module has 16 output points and an operating voltage range of 85 volts AC to 265 volts AC at a frequency range of 47 to 63 hertz. The heat dissipation rating of this module is 4.9 total watts. The operating temperature range is 0 to 60 degrees Celsius.

  • Part Number: 1769-OA16
  • Number of digital outputs: 16 (8 points/group)
  • Operating voltage range: 85…265V AC at 47…63 Hz
  • Current draw at 5.1V: 225 mA
  • Heat dissipation: 4.9 W
  • Current per module, max: 2 A at 60 °C, 4 A at 30 °C
  • Wire size and type: 0.325… 2.080 mm2 (22…14 AWG) solid copper wire or 0.325…1.310 mm2 (22…16 AWG) stranded copper wire rated at 90 °C (194 °F ) insulation max
  • Surge current: 5 A for 25 ms
  • Operating temperature range :0 °C…60 °C (32 °F…140 °F)
  • Dimensions (H x W x D), approx: 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.) Height
  • including mounting tabs is 138 mm (5.43 in.)
  • Weight: 280 g (0.61 lb)
  • Module location: DIN rail or panel mount
  • Power supply: 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4
  • Type: PLC Output Module

The Allen-Bradley 1769-OA16 is a discrete output module from the 1769 Compact I/O product family. This module delivers 85-264 VAC voltage range with frequency of 47-63 HZ. This module has 1.5 slot width that is compatible for use with the CompactLogix and MicroLogix 1500 controllers.

This module can be used to directly energize devices operated by AC voltages. Some of these devices are contactors, relay and solenoid actuated devices; Indicating devices such as pilot lamps; Sounding devices including buzzer, siren, and horn. This module may also be used to indirectly power DC rated devices with the use of an interposing circuitry. Additionally, output fusing is recommended for installation to each output channel to protect the module from damage.

The 1769-OA16 has Two (2) group of output channels. Each group may be operated at different voltage class, whether 120 VAC or 240VAC. Each output channels have output delays of ½ cycle for both signal transitions and the module has a bus current draw of 225 mA at 5.1 VDC. The modules output current per point are 0.25 A @ 60 °C or 0.5 A @ 30 °C and output current per module of 2 A @ 60 °C and 4 A @ 30 °C.

The 1769- OA16 has power supply distance rating of 8Eight (8) modules and compatible for use with 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4. This module follows the standard mounting supported by the host controller which are direct panel mounting or DIN rail mounting. When terminating signal wires to this module, recommended wire size is 22…14 AWG solid or 22…16 AWG stranded copper wire.

When terminating signals to the 1769-OA16, appropriate wire size to be used is 22-14 AWG solid or 22-16 stranded cable. The entire 1769-OA16 module measures 4.65 x 1.38 x 3.43 inches and weighs around 0.61 pounds. It also has an open-type enclosure and it can be mounted using a DIN rail or panel mount. The voltage rating of the 1769-OA16 is 100 to 240 Volts AC and its power dissipation is 4.9 W. Its output voltage is 85 to 265 Volts AC at 47 to 63 Hertz. The off-state leakage current is a maximum of 2 mA at 132 Volts AC and 2.5 mA at 265 Volts AC, while the on-state current is a maximum of 10 mA. The 1769-OA16 module also has a maximum on-state voltage drop of 1.5 Volts peak at 2 Amps. The maximum current per point and per module varies depending on the temperature. The current per point is 0.25 Amps at 60 degrees Celsius and 0.5 Amps at 30 degrees Celsius, while the current per module is 2 Amps at 60 degrees Celsius and 4 Amps at 30 degrees Celsius. The surge current of the 1769-OA16 is 5 Amps for 25 milliseconds that is repeatable every 2 seconds. The response delay time of this module is half a cycle for both the ON and OFF states. It has a non-condensing relative humidity of 5 to 95% and maximum heat dissipation of 4.9 W. The isolation voltage is 265 Volts AC for basic insulation and 150 Volts AC for IEC Class 2 reinforced isolation. The 1769-OA16’s operating vibration is 5 G at 10 to 500 Hertz and its relay operating vibration is 2 G. When mounted on a panel, the module has an operating shock of 30 G, a relay operating shock of 7 G, and a non-operating shock of 40 G. When the module is mounted using a DIN rail, the operating shock is 20 G, the relay operating shock is 5 G, and the non-operating shock is 30 G.

Additional information

Weight 0.35 kg


There are no reviews yet.

Be the first to review “Allen Bradley CompactLogix 16 Pt 240VAC D/O Module 1769-OA16”

Your email address will not be published. Required fields are marked *