Allen Bradley CompactLogix 12 Pt 240VAC D/I Module 1769-IM12


  • In Stock!

  • Manufacturer: Allen Bradley – PLC
  • Product Type: PLC/Programmable Logic Controller
  • Part Number: 1769-IM12
  • Series: CompactLogix
  • UPC: 10662468992821
SKU: 1769-IM12 Category:


This AB Compact 1769-IM12 module is a compact input/output module that can be used in for industrial applications. It provides a set of 12 alternating current (AC) inputs with a voltage allowed of 200/240 V alternating current (AC).

Inputs: 12 (12 points/groups, internally connected commons)
Voltage Category: 200/250V AC
Operating Voltage Range: 159…265V AC; 47…63Hz
Current Draw: 100 mA
Heat Dissipation: 3.65 W
Weight, approx: 300 g (0.61 lb)
Dimensions (HxWxD), approx: 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.)
Off-state voltage, max: 40V AC
Off-state current, max: 2.5 mA
On-state voltage, min: 159V AC
On-state current, min: 5mA @74V AC
Input Delay, on: 20 ms
Input Delay, off: 20 ms
IEC Input Compatibility: Type 1+

The Allen-Bradley Compact 1769-IM12 module belongs to the series of 1769 Compact I/O modules that can be used as an expansion Input/Output with a Micrologix 1500 controller assembly, in an assembly with either a 1769-ADN DeviceNet adapter or a AENTR Ethernet adapter or with a CompactLogix controller. The 1769-IM12 module is used as an Input module for 200/240-volt AC signals. It provides 12 input points with internally connected commons. The module draws a current of 100 milliamps at 5.1 volts and has a maximum heat dissipation of 3.65 watts. The typical on and off input delay is about 20 milliseconds. The dimensions of the product are 118 x 35 x 87 millimeters (4.65 x 1.38 x 3.43 in.).

The device can operate at a temperature between 0°C (32 °F) and 60°C (140°F). The input signals for the module should be in the range between 159 volts and 265 volts AC with a frequency between 47 hertz and 63 hertz. The 1769-IM12 module holds a maximum inrush current for the inputs of 250 milliamps. However, a resistor can be used in order to limit the inrush current. If a 6.8 kiloohm resistor is placed in series with the input, the resulting inrush currented will become 35 milliamps. When adding a resistor, it is important to consider its operating temperature and the limits of the environment. The 1769-IM12 module has status LEDs in order to provide the user a feedback on the status of the inputs. The insulation voltage fits IEC Class 2 reinforced insulation. The device is intended to be used in a dry and clean environment. The pollution degree of the environment should be 2 (meaning that only non-conductive pollution may occur) and circuits should not exceed Over Voltage Category II.


Additional information

Weight 0.31 kg


There are no reviews yet.

Be the first to review “Allen Bradley CompactLogix 12 Pt 240VAC D/I Module 1769-IM12”

Your email address will not be published. Required fields are marked *