Allen Bradley PLC POINT Input Module 1734-IE2C


  •  In Stock!

  • 24V DC.
  • 2 Point Input Module.
  • Manufacturer: Allen Bradley – PLC
  • Product Type:  Analog Input Module
  • Part Number: 1734-IE2C
  • Series: Point I/O 1734
  • UPC:10612598205230
SKU: 1734-IE2C Category:


The 1734-IE2C is an analog current input module that is part of Allen-Bradley’s POINT IO product family.

  • Keyswitch position: 3
  • Power Dissipation: 0.6 W @ 28.8V DCCurrent Draw: 75 mA @5V dc
  • Input update rate per module: 120 ms @ Notch = 50 Hz 100 ms @ Notch = 60 Hz (default) 24 ms @ Notch = 250 Hz 12 ms @ Notch = 500 Hz
  • Input step response (per channel): 80 ms @ Notch = 50 Hz 70 ms @ Notch = 60 Hz (default) 16 ms @ Notch = 250 Hz 8 ms @ Notch = 500 Hz
  • Absolute Accuracy 0.1% Full Scale @ 25 Deg. Celsius
  • No. of outputs: Two (2) Single-ended, non-isolated channels
  • Resolution: 16 bits – over 0…21 mA 0.32 μA/cnt
  • Inputs: 2-Point
  • Conversion Type: Delta Sigma
  • Calibration: Factory Calibrated
  • Max Overload: Fault Protected 28.8 Volts DC
  • Enclosure Type: Open
  • Data Format: Signed Integer
  • Voltage: 10 to 28.8 Volts DC
  • Current:10 mA

This module operates at an input current of 4 to 20 mA or one of 0 to 20 mA. For wiring input signals, recommended wire size is 22 to 14 AWG solid or stranded shielded copper wire rated at 167 degrees Fahrenheit or higher.

The 1734-IE2C POINT I/O current input analog module has 2 single-ended, non-isolated channels. It gives 16 bits across a 0 to 21 mA resolution.

The 1734-IE2C is a 2-channel module that converts an analog input current to a digital value and reads a current input between 0 to 20 mA or 4 to 20 mA depending on the mode that is selected.

The supported networks include ControlNet, DeviceNet, and EtherNet/IP. Moreover, the 1734-IE2C uses an external DC power supply rated at 10 to 28.8 Volts DC and 24 Volts DC nominal, and it uses a current with a 10 mA rating.

The 1734-IE2C is rated to withstand 2550 Volts DC for 60 seconds and it has 50 Volts of continuous isolation voltage. It gives off a maximum power dissipation of 0.6 W at 28.8 Volts DC and a maximum thermal dissipation of 2.0 BTU/hour at 28.8 Volts DC.

The 1734-IE2C is basically an analog input card that requires a terminal base to function. Compatible terminal bases for use with this analog input module include 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS.

This module support vertical and horizontal mounting and support mounting to a standard 35 mm DIN rail. When mounting the module to the appropriate terminal base, the module’s keyswitch must be positioned at position 3.

The 1732-IE2C has an internal Analog to Digital (ADC) converter which has a conversion resolution of 16 bits – over 0…21 mA 0.32 μA/cnt using Delta-Sigma conversion. Converted data is stored in Signed Integer format with absolute accuracy of 0.1% Full Scale @ 25 °C (77 °F) with accuracy drift of 30 ppm/°C.

The 1734-IE2C is compatible for use with any Allen-Bradley controller platform. Most especially, it is well suited with the Logix product family specifically, CompactLogix and ControlLogix controller platforms.

This module supports a variety of communication adapters which enable the module to communicate to the master controller over a particular industrial protocol.

This module weighs approximately 0.036 kilograms or 0.08 pounds. In addition, it has an open-style enclosure type rating and it has dimensions of 56 x 12 x 75.5 millimeters or 2.21 x 0.47 x 2.97 inches.

Additional information

Weight 0.03 kg


There are no reviews yet.

Be the first to review “Allen Bradley PLC POINT Input Module 1734-IE2C”

Your email address will not be published. Required fields are marked *