Description

The 1763-L16AWA belongs to Bulletin 1763 series of products from Allen-Bradley. There are a total of twelve discrete input channels on this module. Each of these channels requires 120 volts alternating current. There are also two analog inputs, each with an input power range of 0-10 volts direct current. And lastly, this module features a total of six relay outputs. For communication, this module comes with one Ethernet and one RS-232 port.

Part Number/Catalog No. 1763-L16AWA
Series MicroLogix 1100
Input Power 120 to 240 Volts AC
Point Count 16 Points
Digital Inputs (10) 120 Volts AC
Analog Inputs (2) Voltage Input
Analog Voltage Range 0-10VDC
Analog Data Type 10-bit unsigned integer
Analog Resolution 10 Bit
Digital Outputs (6) Relay
Data Type 10 bit unsigned integer
Display Type LCD
Communication Port 1 RS-232 / 485; 1 Ethernet

The 1763-L16AWA is a MicroLogix 1100 Programmable Controller by Allen-Bradley and Rockwell Automation. It has 12 inputs (10 digital and 2 analog) and 6 outputs. This hardware has a relay output circuit type and an operating frequency of 47…63 Hertz. General specifications for the 1763-L16AWA include a power supply voltage of 100…240 Volts AC at 47…63 Hertz and a power consumption of 46 Volt-amperes. It has approximate dimensions of ,90 x 110 x 87 millimeters or 3.5 x 4.33 x 3.43 inches; the shipping weight for this controller is 0.9 kilograms, or 2.0 pounds. This device has an operating temperature between -20 and 65 degrees Celsius and a storage temperature b etween -40 and 85 degrees Celsius; relative humidity is 5% to 95%, non-condensing. The 1763-L16AWA by Allen-Bradley has an operating vibration rating of 10…500 Hertz, 5 g, 0.015 inches maximum peak-to-peak (2 hours each axis); relay operation is 1.5 g. Operating shock rating is 30 g; 3 pulses each direction, each axis while relay operation is 10 g. Nonoperating shock is 50 g panel mounted; 3 pulses each direction, each axis.

Additional general specifications for this hardware include ESD immunity that is compliant with EN 61000-4-2 and radiated RF immunity that is compliant with EN 61000-4-3; fast transient immunity is compliant with EN 61000-4-4 and surge transient immunity is compliant with EN 61000-4-5. Conducted RF immunity is compliant with EN 61000-4-6. Input specifications include an on-state voltage range between 79…132 Volts AC and an off-state voltage range between 0…20 Volts AC.

The 1763-L16AWA comes with support for 10-bit integers. It only supports analog data types. The analog resolution on this module is 10 bits. There are a total of 6 different digital relay outputs on this module. When it comes to communication, there are two sets of communication ports – one ethernet port, and one RS-232 / 485 port. It has a dimension of 3.5 inches x 4.33 inches x 3.43 inches. There is one LCD display mounted on the front panel. It comes with 16-point counts. The RS-232 / 485 ports are meant to be used for network and peer-to-peer communication. The RS-232 is specially designed for peer-to-peer communication. On the other hand, the RS-485 port should be used for multi-node communication. To connect this module with an Ethernet IP network, users can use the Ethernet port. This port supports data exchange at the rate of 10/100 megabytes per second. Users should use the LCD screen to set the different communication parameters. The LED display is also used for conducting I/O tests.

The 1763-L16AWA allows users to create their own user programs. The relay output channel is designed to withstand a maximum of 10 amperes of load current. It has 10,000,000 cycles of lifespan. It only takes 10 seconds to execute the On/Off command. This terminal must be supplied with a voltage ranging anywhere in the range of 120 to 240 volts alternating current (AC), or 125 volts direct current (DC).